Wednesday 12 December 2018

Setup Basic GUI In TermuxAlpine

11 comments
Hax4us
After long time , i am again active with new post in which i am going to tell you that how can we setup basic GUI in Termux Alpine. Basic setup means openbox with xfce4-terminal.

Requirements :-
Follow these steps :-
  1. Open your alpine : startalpine
  2. update your alpine : apk update
  3. Install required packages : apk add xvfb openbox xfce4-terminal x11vnc
  4. Run Xvfb : Xvfb :1 -screen 0 1920x1080x24 &
  5. Run x11vnc :  x11vnc -xkb -noxrecord -noxfixes -noxdamage -display :1 -nopw -wait 5 -shared -permitfiletransfer -tightfilexfer -noshm &
  6. Hit Enter again if any command would be stuck
  7. After x11vnc , its time to launch openbox : DISPLAY=:1 openbox &
  8. Now finally we can run terminal : DISPLAY=:1 xfce4-terminal &
Okk now xfce4-terminal is running and it's time to fireup Vnc Viewer and follow below steps :-
  1. Click on plus (+) green icon at bottom right.
  2. Type 127.0.0.1::5900 in Address field.
  3. Type anyname in Name field like you can type TermuxAlpine or Alpine etc .
  4. Click on create then tap on connect.
OK fine now you can see xfce4-terminal in front of you :)

Some Important Points 
  • After disconnecting from VNC Viewer App , x11vnc will be closed automatically.
  • But you will have to kill openbox and xfce4-terminal by yourself.
  • You can reinstall Alpine with my new script then you will not have to kill things , just exit from Alpine , all proot things will be killed.
Want to connect with me ?
  • You can join WhatsApp Group , msg me "ADD" at 8800404950 
  • Follow me on Instagram , ID is Hax4us
  • Second Instagram ID is dcent_07 ( this I'd is not for Techy things so if you are following me for your techy questions so don't follow on this account thnx :) ) but yes if you want to be my friend then you can follow.
  • Facebook Page https://Facebook.com/Hax4us
Happy Termux :)
Read More

Sunday 15 July 2018

Install Burpsuite In Termux Nethunter

23 comments
Hax4Us

Hey, I am lokesh and today we are going to install Burpsuite in our Termux Nethunter.

Burp or Burp Suite is a graphical tool for testing Web application security. The tool is written in Java and developed by PortSwigger Security.

So yes it is possible to install and run Burpsuite in Kali Nethunter Prooted Environment but before any further installation steps please make sure you have LXDE installed in Nethunter otherwise Burpsuite may not run :(

Requirements :--

  1. Nethunter ( Not installed ? Click here )
  2. LXDE ( Not installed ? Click here )
  3. Minimum Space Required = 150 MB
Note :- All commands are highlighted

Follow All Steps One By One Carefully  :--





  1. Open your Nethunter startkali
  2. Install Burpsuite apt install burpsuite -y
  3. Run Burpsuite java -jar /usr/bin/burpsuite
  4. Configure your Burpsuite and enjoy :)
If you still confused with above steps you can click here for demo video 


You can checkout Official Site of Burpsuite for more instructions of usage ( Link )

Screenshots :--

Hax4Us

Hax4Us

Read More

Saturday 7 July 2018

How To Install LXDE In Kali Nethunter Of Termux Without Root

72 comments
Hax4Us

Hey , I am Lokesh and today I will tell you that how can we install LXDE Full Desktop Environment in termux using Kali Nethunter Without root :)

So First of all you will have to install Kali Nethunter from my latest script and if you have already installed so install it again otherwise LXDE may not properly install.

Don't know how to install Nethunter ? Click below :)

Install Nethunter In Termux

So now i am assuming you have Nethunter in termux and you did all necessary and compulsory steps from installation guide after installation.

Requirements

  • Minimum Storage : 1.5gb
  • Must be my subscriber 😂


Follow these steps or just paste commands one by one 






  1. First Update apt-get update 
  2. Install LXDE apt-get install lxde-core lxde kali-defaults kali-root-login desktop-base
Now take a cup of tea because it will take time and also depends on your Internet speed.

So now LXDE is installed but how to start ?

Follow these steps to start your LXDE session 

  1. Download and Install Xserver XSDL App From Play Store or Click here 
  2. Now open your installed app and download additional fonts ( 60 Mb) 
  3. Wait for 3-4 seconds 
  4. Now minimize the XSDL app and goto termux 
  5. Now execute this command in Nethunter DISPLAY=127.0.0.1:0 PULSE_SERVER=tcp:127.0.0.1:4712 startlxde &
  6. Go back to Xserver XSDL App and wait up to 5 seconds then you will get LXDE desktop environment 


Screenshots


Hax4us

Hax4us

Hax4us

Read More

Saturday 30 June 2018

Install Latest Java 9 In Termux Without Root

9 comments
Hax4Us
Update :- This method is not working now I will upload new post asap for java

Hey , I am lokesh and today I will share a simple guide in order to install Java Jdk/Jre.

So Just Follow Below Steps 





  • Install dirmngr and gnupg  apt install dirmngr gnupg-curl -y
  • Add PGP key apt-key adv --keyserver pool.sks-keyservers.net --recv 9D6D488416B493F0
  • Add Repo mkdir -p $PREFIX/etc/apt/sources.list.d && echo "deb https://termux.xeffyr.ml/ extra main x11" > $PREFIX/etc/apt/sources.list.d/list.list
  • Update apt update
  • Now you can install java jdk apt install openjdk-9-jdk-headless -y
Some Amazing Tutorials For Termux Lovers 
Read More

Thursday 28 June 2018

Little Guide Of Termux Basic Commands Part-2

1 comment
Hax4us

Hey , I am Lokesh today I am going to teach some more basic commands of termux.

In previous part we learnt about cd and ls so today we will learn about two more commands cp and mv.


cp





cp stands for copy. It is very simple but useful command. There are lots of option available in cp but I will cover only specific useful options so let's take an example for understanding the working of cp

I have two folders and one file in home directory



So I want to copy file1 into folder one. I will just write cp "resource" "destination" so here resource is file1 and destination is folder one so final command would be look like this cp file1 one



But it will work only if you are in current directory means a directory where both resource and destination exists but what if I want to copy a file from current directory to a folder which is not in current directory so it is also very simple task , again let's take an example

So now I am in $HOME directory of termux . $HOME means /data/data/com.termux/files/home , so in short I can say I am in home directory , so I have a file file1 and I want to copy this file into a folder two which is exist in folder one so my command for copy would be cp resource path/to/destination means cp file1 one/two


But what if resource and destination both are not in current directory ?

Simple , just write full path of both like this



Okk now we can copy Any file anywhere but what if i want to copy a folder in which my all files are present. For this cp has a option -R by which we can copy whole folder so let's take an example for understanding

I have two folders one and two and I want to copy folder one into folded two so I will write cp -R one two OR cp -R /path/to/one /path/to/two in the case when both folders are not exist in current directory


mv

mv stands for move. mv is just like a variation of cp with Deletion feature. Means cp only copies or create a duplicate copy of your resource without touching your original resource but mv will create a copy of your original content then delete original content. So cp + delete = mv . let's take an example to understand working of mv

I have a file file1 and folder one

I want to move file1 into folder one so I will write mv "resource" "destination" means mv file1 one



Same rule applied here if one of them resource or destination or both are not in current directory then we will have to give full path like this



Here we don't need of any -R option like cp in case of moving whole folder like below



Remarks :-


  1. Simple copy command for Any file in current directory cp resource destination
  2. For different directory cp /path/to/resource /path/to/destination
  3. For copy whole folder we need -R, cp -R wholefolder destination
  4. $HOME means /data/data/com.termux/files/home it means if you have a folder one in home and you want to copy folder one from anywhere so you will have to give full path but instead of giving /data/data....blah blah  you can write $HOME/one or $HOME/path/to/one if one is not in home 
  5. For  move whole folder you don't need -R
We will continue our journey in next parts of basic Termux command.
Read More

Tuesday 26 June 2018

Little Guide Of Termux Basic Commands Part-1

Leave a Comment
Hax4us
Hey , I am Lokesh today I am going to teach some basics commands of termux.

Well there is no difference between Linux commands and Termux commands so I can say almost command are same.

cd





cd means change the directory. Its very simple and basic command for beginners. Let's take some examples to understand the working of cd command.
Suppose that I have two folders in home directory of termux.


So I want to goto folder one means I want to change the current directory to one so its very simple just write name of folder or directory after cd  in which you want to enter so command would be like this


So now I am in folder one but wait now i want to go back so is it possible ? Yh just write two dots (..) after cd to go back one step like this


Note that there is a space between cd and two dots and same rule applied for all commands. There must be space after command name. Don't mixup the command with arguments like this


OK so now we know two things

  1. How to change directory or folder
  2. How to go back to my previous directory

ls 

ls stands for list. So as name suggests this command will give us list of current directory (if executed in current directory).

Confused ? :( OK Lets take an example :)

Suppose that I have two folders and one file in home directory of Termux but I want see all as a list so I will just execute ls (see screenshot)


But now I don't want to see list of current directory. Now I want to see list of my folder "one" so I will just write name of folder after ls ( see screenshot)


Now we know four things :
  1. How to change directory or folderw
  2. How to go back to my previous directory
  3. How to list all things in current directory
  4. How to list all things from any other directory.

We will continue our journey in next parts of basic Termux command.



Read More

Friday 5 January 2018

How To Access Sdcard Or External Storage In Termux Without Permission Denied Error

27 comments

Welcome To HaX4Us


It is very common thing for Termux users but also a root of common error which is permission denied.

And it is obvious that you will try to access sdcard or external storage in termux to save your any important thing & one more noticeable thing is that the permission denied error does not come in Android 5 or before.

It means that you are here because you have Android 6.0 or later. So the only thing what you have to do is that




  • run this command in termux termux-setup-storage
hax4us
  • After then you will be prompt for permission like as below screenshot so you have to click on allow
Hax4us

Executing termux-setup-storage ensures:

  1. That permission to shared storage is granted to Termux when running on Android 6.0 or later.
  2. That an app-private folder on external storage is created (if external storage exists).
  3. That a folder $HOME/storage is created.

~/storage

The contents of the created $HOME/storage folder are symlinks to different storage folders like as given screenshot

Hax4us
In case of any query , you can ask in comment section.

Read More

How To Edit Recovery Images Or Boot Images From Android

6 comments

Hello Guys, Welcome To Hax4Us



Here I am introducing an amazing all-in-one app for extract .img files like recovery or boot images files.

Android Image Kitchen is a popular tool for Linux and ported to android in the form of Apk :)





DISCLAIMER: MAY NOT WORK WITH YOUR IMAGE. 

Due to the fragmentations among Android vendors, this app may or may not work with your boot image, and don't be frustrated when it does not. I am also not responsible for any damage to your phone.

BOOT/RECOVERY: Use this tool to unpack/repack a boot/recovery image. This part is built on top of osm0sis's Android image kitchen but added support for some MTK devices. You can use "dd" or apps such as "Flashify" to flash image back.

SYSTEM: Make sure you have root and a loop device enabled kernel to make the magic happen.  If the system image is a sparse image, the app will try to convert it to a raw image in the same directory  and then mount the raw image; if the system image is a raw image, the app will mount it directly. You can use "dd" to flash image back.

EDITING: You can edit plain text files with the built in file editor or your favorite file editors such as "QuickEdit" or "DroidEditor". You can also view images from the built in image viewer or other viewers. If you want to edit image or binary files, you need to first export the files out and edit them with other apps. "HexEditor" has a limitation which prevents this app from sending binaries for direct editing.

From where should i install ?

Go to play store :)
Read More

Thursday 4 January 2018

How To Make/Create Deb Package In Termux (Part-2)

5 comments
Hello Guys, Welcome To Hax4Us


So guys I know that why are you here that's why without any blah blah I am going to teach you that how can you make your own deb package in termux for termux.

Usage :

This tool expects packages to be defined in JSON manifest files. Run termux-create-package -h for more information.
An example manifest file is given below:

{
  "name": "newproject",
  "version": "1.0",
  "homepage": "http://mywebsite.com",
  "maintainer": "@Hax4us",
  "description": "my description",
  "arch": "all",
  "depends": ["dependency"],
  "files" :{
    "myfile.py": "bin/myfile",
    "mylib.so": "lib/mylib.so"
  }
}

The fields are as follows :

  • name: The name of your package.
  • version: The version of the package.
  • maintainer: Optional informative field specifying who maintains the package.
  • homepage: Optional informative field specifying a homepage URL.
  • description: Optional informative field containing a short description of the package.
  • depends: Comma-separated list of packages that this package depends on. Will be installed automatically when this package is installed using apt.
  • arch: Set to all if the package only contains architecture-independent data, or one of arm/i686/aarch64/x86_64 as appropriate.
  • files: Files relative to the manifest file that should be included in the package. The keys are paths (relative to the current directory) to include and the values are paths where the files should end up at installation (relative to the $PREFIX path in Termux where everything is installed under).
Run the following command to create a package file named ${name}_${version}_all.deb:

$ termux-create-package manifest.json





This can then be installed in Termux using the command:

apt install ./my-package-file.deb

So my friends I hope that now you can make your own deb package without any hassle :)

Note :- In case of any error you can ask in comment section thnx :)

Read More

How To Make Own Deb Package In Termux (Part-1)

44 comments
Hello Guys, Welcome To Hax4Us


Yes, Termux is built on users' contributions. Termux is an open source application; And there are many benefits. The source code is hosted at GithubTermux-app is the repository for the actual App. Changes to the user interface and terminal emulator can be made here. The termux-packagesrepository is where the apt repository of Termux is located. You can modify and add packages here.

Can I Create My Own Deb Package ?

Yes , you can ! Firstly you will have to open termux and execute this command apt install termux-create-package then you can use this command for more info termux-create-package -h 

It is very easy to create deb files for termux by termux-create-package and if you want to learn more clearly about that you can goto link given below ;)




Make deb package Part-2
Read More